The most advanced condensing tankless water heaters in the industry with exclusive ComfortFlow® technology for continuous hot water.
| Item |  NPE-210A |
|
|---|---|---|
| Summary |
|
|
| Heat Capacity (input) | Natural gas | 19,900 – 180,000 (BTU/H) |
| Propane gas | 19,900 – 180,000 (BTU/H) | |
| Efficiency Ratings | UEF (NG & LP) | 0.96 |
| EF (Canada NG & LP) | 0.97 | |
| Flow rate (DHW) | 35°F (19°C) temp rise | 10.1 GPM (38.2 L/m) |
| 45°F (25°C) temp rise | 7.8 GPM (29.5 L/m) | |
| 67°F (37°C) temp rise | 5.0 GPM (18.9 L/m) | |
| Dimensions | 17.3″ W x 27.4″ H x 13.2″ D | |
| Weight | 82lbs (37kg) | |
| Installation Type | Indoor or outdoor wall-hung | |
| Venting Type | Forced draft direct vent | |
| Ignition | Electronic ignition | |
| Water Pressure | 15.0-150.0 psi | |
| Natural gas supply pressure (from source) | 3.5″ WC to 10.5″ WC | |
| Propane gas supply pressure (from source) | 8″ WC to 13.5″ WC | |
| Natural gas manifold pressure (min-max) | -0.05″ WC to -0.36″ WC | |
| Propane gas manifold pressure (min-max) | -0.05″ WC to -0.5″ WC | |
| Minimum flow rate | 0.5 GPM (1.9 L/m), < 0.01 GPM (0.04 L/m) option for “A” models* | |
| Connection Sizes | Cold water inlet | 3/4″ |
| Hot Water Outlet Size | 3/4″ | |
| Gas inlet | 3/4″ | |
| Power Supply | Main supply | 120V AC, 60Hz |
| Maximum power consumption | 200W (max 2A), 350W (max 4A) with external pump connected | |
| Materials | Casing | Cold rolled carbon steel |
| Heat exchangers | Primary heat exchangers: stainless steel; secondary heat exchangers: stainless steel | |
| Venting | Exhaust | 2″ or 3″ PVC, CPVC, polypropylene / 2″ or 3″ special gas vent type BH (Class II, A/B/C) |
| Intake | 2″ or 3″ PVC, CPVC, polypropylene / 2″ or 3″ special gas vent type BH (Class II, A/B/C) | |
| Vent clearances | 0″ to combustibles | |
| Safety Devices | Flame rod, APS, ignition operation detector, water temperature high limit switch,exhaust temperature high limit sensor, power surge fuse | |
You must be logged in to post a review.
Exclusive built-in recirculation system included on all NPE-A models.
Navien ComfortFlow® is the first and only system that incorporates a built-in insulated buffer tank and recirculation pump.
The buffer tank eliminates the “cold water sandwich” effect and issues of minimum flow rates commonly found in other tankless water heaters. The recirculation pump saves on water bills by reducing the time to get hot water. When activated, the optional ComfortFlow mode results in additional energy usage.
ComfortFlow® recirculates hot water through supply lines, eliminating wait time for hot water.
Front Panel Control Center
Self-diagnostics.Cascade up to 16 units withNavien Ready-Link® technology.
Common vent up to 8 units
Optional Wi-Fi remote control system
NaviLink makes it easy to communicate with your Navien systems anywhere internet service is accessible. The NaviLink module attaches easily to any new or existing* Navien NPE Series tankless water heater, NCB-E Series combi‐boiler and NHB Series boiler.
Optional hot water activation
system for all NPE-A units
At the push of a button, the Navien HotButton hot water system activates the internal recirculation pump and gas fired burner to heat water in the supply lines to provide hot water whenever it’s needed.
The H2Air Kit utilizes the NPE-A pump to circulate the hot water for the hydronic air handler. This removes the need to purchase an additional circulator for the heating system.
Designed for retrofit and new construction, the Navien H2Air Kit™ includes an add-on controller to integrate space heating and DHW between any NPE-A series tankless water heater and a hydronic air handler.
Susanna Pingitore
I've been a client of Cozy Comfort for 15 yrs. for any HVAC need or service.
My AC broke down in the heat wave and could not be repaired. I called and talked to Brian @ Cozy Comfort.
Explained I was looking for a specific Carrier model and a humidifier as well.
He managed to find it and had both installed by tech. Alex and his crew within a few days. They did a good job and took all garbage with them.
While being installed, other companies I had called for a quote were calling me to inquire what I was looking for. Told them too late!
During this unexpected breakdown in prime summer heat, Brian was patient, quick and fair getting the job done quickly.
These days it is difficult to give a positive review but I highly recommend dealing with Brian at Cozy Comfort for any service they offer.
Read More
David GucciardiCozy Comfort came highly recommended by my parents after they did some work for them. We had a new furnace, water heater, humidifier, and thermostat installed and they did a great job from the initial visit to the final install.
Read More
Jeffrey HoffmanFrom installation to maintenance, Cozy Comfort Plus Inc. provided us with prompt, quality service. It took under a day to install our Mitsubishi split-type air conditioner in May, 2021. This week, they attended to cleaning our unit’s filters in less than a day’s notice. The technician explained how to remove, clean and reinstall the filters ourselves which will save us money down the road. I highly recommend Cozy Comfort without reservation.
Read More
Reviews
There are no reviews yet.