Carrier Weathermaster – 50HC Commercial Rooftop Units

50HC WEATHERMASTER® rooftop unit were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, “no-strip screw” collars, and handled access panels, we’ve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron® (R-410A) refrigerant at the factory. The units are factory tested in cooling mode.

  • 3 to 25 Nominal Tons

Performance Features

  • ASHRAE 90.1 and Energy Star compliant
  • Up to 15.6 SEER, 13.0 IEER, and 12.2 EER
  • Standard cooling operating range up to 125 °F (52°C) and down to 35°F (-2°C). Low ambient controllers can bring cooling operation down to -20°F (-29°C)
  • Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • TXV refrigerant metering device on each circuit with removable power element
  • Fully insulated cabinet

Maintenance Features

  • Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
  • Access panels with easy grip handles and tool-less filter access door
  • Innovative, easy starting, no-strip screw feature on unit access panels
  • Optional hinged access panels also available
  • Belt drive evaporator-fan motor and pulley combinations available on all three phase models to meet any application
  • Electric Drive x13 (5 speed/torque) motor on 04 to 06 models
  • Two-inch disposable return air filters

Installation Features

  • Same footprint as installed Carrier 3-5 and 7.5-10 ton rooftops back to 1989, reducing installation costs and time
  • Field convertible from vertical to horizontal airflow for slab mounting (sizes 04 to 14)
  • Provisions for thru-the-bottom power entry capability as standard
  • Single point gas and electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Dedicated vertical and horizontal airflow models available (factory option on size 17 to 28 units)

Reliability Features

  • Scroll compressors with internal line-break overload protection
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Totally enclosed condenser motors with permanently lubricated bearings
  • Low pressure and high-pressure switch protection
  • Solid-state electronic direct spark ignition system and flame roll-out safety protector

Standard Limited Warranty

  • 10 years parts only electric heater
  • 5 years parts only compressor
  • One year parts only on all other parts
  • Extended warranty packages available

Reviews

There are no reviews yet.

Be the first to review “Carrier Weathermaster – 50HC Commercial Rooftop Units”

Factory-Installed Options

  • Cabinet
    • Thru-the-base electrical or gas-line connections
    • Hinged access panels
    • Foil-faced insulation
  • Coil Options
    • Cu/Cu indoor and/or outdoor coils
    • Pre-coated outdoor coils
    • Premium, E-coated outdoor coils
  • Humidity Control
    • Humidi-MiZer Adaptive dehumidification system
  • Condenser Protection
    • Condenser coil hail guard (louvered design)
  • Controls
    • ComfortLink™ DDC communicating controller
    • PremierLink™ DDC communicating controller
    • RTU OPEN™ open-protocol controller
    • Smoke detector (supply and/or return air)
  • Energy Recovery
    • EnergyX® Factory Integrated Energy Recovery
  • Economizers & Outdoor
    • Air Dampers
    • EconoMi$er IV (for electro-mechanical controlled RTUs)
    • EconoMi$er X (for electro-mechanical controlled RTUs with CA Title 24 FDD)
    • EconoMi$er2 (for DDC controlled RTUs)
    • Ultra-low leak economizer dampers
    • Motorized 2 position outdoor-air damper
    • Manual outdoor-air damper (sizes 17-30)
    • Barometric relief
    • Power exhaust (sizes 17-30)
  • Economizer Sensors & IAQ Devices
    • Single dry bulb temperature sensors
    • Single enthalpy sensors
    • CO2 sensor (wall, duct, or unit mounted)
  • Electric Heat
    • Multiple Electric Resistance Heater KW Sizes
    • Single Point kit
  • Indoor Motor & Drive
    • Multiple motor and drive packages
    • Staged Air Volume (SAV) Indoor Fan Speed System (sizes 08-28)
  • Low Ambient Control
    • Motormaster® head pressure controller
  • Power Options
    • Convenience outlet (powered)
    • Convenience outlet (unpowered)
    • Non-fused disconnect
    • HACR Circuit Breaker

Field-Installed Accessories

  • Cabinet
    • Thru-the-base electrical or gas-line connections
  • Condenser Protection
    • Condenser coil hail guard (louvered design)
  • Controls
    • Thermostats, temperature sensors, and subbases
    • PremierLink™ DDC communicating controller
    • RTU OPEN™ open-protocol controller
    • Smoke detector (supply and/or return air) (sizes 17-30)
    • Time Guard II compressor delay control circuit
    • Filter status switch
    • Fan status switch
  • Economizers & Outdoor
    • Air Dampers
    • EconoMi$er IV (for electro-mechanical controlled RTUs)
    • EconoMi$er X (for electro-mechanical controlled RTUs with CA Title 24 FDD)
    • EconoMi$er2 (for DDC controlled RTUs)
    • Ultra-low leak economizer dampers
    • Motorized 2 position outdoor-air damper
    • Manual outdoor-air damper
    • Barometric relief
    • Power exhaust
  • Economizer Sensors & IAQ Devices
    • Single dry bulb temperature sensors
    • Differential dry bulb temperature sensors
    • Single enthalpy sensors
    • Differential enthalpy sensors
    • CO2 sensor (wall, duct, or unit mounted)
  • Electric Heat
    • Multiple Electric Resistance Heater KW Sizes
    • Single Point kit
  • Low Ambient Control
    • Winter start kit
    • Motormaster® head pressure controller
  • Roof Curbs
    • Roof curb 14” (356mm)
    • Roof curb 24” (610mm)

Data

Nominal Cooling Ton Size Cooling Stages AHRI Efficiency (SEER) EER Dimensions (in) LxWxH Electric Heat Nominal Kilowatt Range Approx. Unit Weight (lbs)
3 1 (15.0) 74 x 47 x 33 4.0 to 16.0 458
4 1 (15.6) 74 x 47 x 41 4.4 to 23.0 545
5 1 (15.2) 74 x 47 x 41 6.5 to 26.5 550
6 1 12.2 88 x 59 x 41 6.0 to 26.5 715
7.5 2 12.2 88 x 59 x 49 10.0 to 42.4 860
8.5 2 12.2 88 x 59 x 49 10.4 to 42.4 860
10 2 12.0 88 x 59 x 49 10.0 to 51.0 865
10 2 11.7 88 x 59 x 49 10.0 to 51.0 865
12.5 2 12.4 116 x 63 x 57 15.0 to 51.0 1075
15 2 12.2 128 x 87 x 49 25.0 to 75.0 1093
17.5 2 12.2 141 x 87 x 49 25.0 to 75.0 1793
20 2 12.2 141 x 87 x 57 25.0 to 75.0 2148
25 2 11.4 158 x 87 x 57 25.0 to 75.0 2193

People like you shared their purchase and installation experience!

Maria LeitaoMaria Leitao

Maury from Cozy Comfort did a fantastic job of examining the functionality of my furnace and cleaning the major components. He tested my furnace to make sure that it would run efficiently in the winter. My humidifier was cleaned, the drip pad replaced and settings properly set up. Thank you Maury for your effective care. thank you Cozy Comfort- you are a company that has proven your worth over the past 25 years that you have looked after my family's heating and cooling needs.

Read More
Jeffrey HoffmanJeffrey Hoffman

From installation to maintenance, Cozy Comfort Plus Inc. provided us with prompt, quality service. It took under a day to install our Mitsubishi split-type air conditioner in May, 2021. This week, they attended to cleaning our unit’s filters in less than a day’s notice. The technician explained how to remove, clean and reinstall the filters ourselves which will save us money down the road. I highly recommend Cozy Comfort without reservation.

Read More
David GucciardiDavid Gucciardi

Cozy Comfort came highly recommended by my parents after they did some work for them. We had a new furnace, water heater, humidifier, and thermostat installed and they did a great job from the initial visit to the final install.

Read More