FEATURES:
- Meets or exceeds ASHRAE Standard 90.1.
- Standard bottom-bottom flow configuration, with horizontal flow available for on grade installations.
- Double-wall and roof construction with galvanized sheet metal liner to protect against microbial growth.
- Rigid sheet metal inner liner to keep insulation fibers out of the airstream.
- Sloped evaporator coil drain pans protects against corrosion and bacterial growth.
- Pitched roof design for natural drainage.
- Four scroll compressors for efficiency and durability. Tandem compressor design, with fully interlaced indoor coil circuits, provides wider capacity turndown and unloading capabilities.
- Extended flue connection on gas heating units to eliminate the possibility of corrosion in the furnace heat exchanger.
- Constant air volume or Variable air volume by variable frequency drive (VFD).
- Full range of airflows and static pressures meets most application requirements.
- Filter selections from standard 2″ up to optional 12″ — 95% MERV 14 to meet current LEED points rating.
- Single or dual power electrical point connections.
- Simple unit controls that are easy to understand, apply and update.
- Rain hoods easily fold into place — a one-person job.
- Easy service access with hinged and latched doors on both sides of the unit.
- Durable finish, made of powder-coated paint on galvanized steel meets the ASTM B-117 1000-hour salt-spray test demands.
- Optional VFD head pressure control where mechanical cooling is required below 40°F; allows compressor operation down to 0°F.
- Premium efficiency motors offered to meet tighter energy codes.
- Optional stainless steel gas heat exchangers provide extended heating section life.
- Standard or replaceable core refrigerant side filter driers.
- Complete line of factory-installed accessories, including economizers, electric heat, power exhaust, a variety of blower horsepower ratings, full compressor isolation valves, 115V convenience outlets and more.
- Standard Smart Equipment™ Elite control system provides unitary BAS capabilities such as monitoring, scheduling, local and remote set point adjustment. Offers the open communication protocol of ModBUS and BACNET MSTP.
