Carrier Weathermaster – 48P

  • 48P2 – Vertical CV/SAV
  • 48P3 – Vertical VAV
  • 48P4 – Horizontal CV/SAV
  • 48P5 – Horizontal VAV
    Carrier P Series rooftop units are pre-wired and factory-tested in both cooling and heating modes. All models feature an industrial grade cabinet with fully hinged access panels. Forward-curved supply fans provide the performance of up to 4 in. external static pressure (ESP) and 6 in. ESP with optional airfoil supply fans.
    Units are available in the constant volume (CV), staged air volume (SAV), or variable air volume (VAV) applications, with a wide variety of gas heating options. Units come with the ComfortLink™ DDC (direct digital control) control system, scroll compressors on independent thermostatic expansion valve (TXV) controlled refrigeration circuits.
  • 30 to 100 Nominal Tons

Performance Features

  • Multiple high-efficiency scroll compressors include a crankcase heater and vibration isolation
  • Up to 8 steps of cooling capacity control with intertwined evaporator coils for full-face active operation at part-load conditions
  • Cooling operating range from 32 to 115 F ambient (down to -20 F with accessory Motormaster® V control)
  • ComfortLink™ control includes: easy to use scrolling marquee display, service diagnostics, run test capabilities, demand limit
  • capability, compressor reverse rotation protection, and BACnet communication option.
  • Tested in accordance with UL Standard 1995 and listed by ETL and ETL, Canada
  • Meet or exceed the EER requirements of ASHRAE Standard 90.1, rated in accordance with ARI Standard 340/360
  • California Energy Commission Title 24 Compliant

Reliability Features

  • Dual electrically and mechanically independent refrigerant circuits, with coil frost protection, liquid line filter driers, and crankcase
  • heaters standard on all models
  • Compressor protection includes high and low-pressure transducers with safety cutouts
  • Circuit breaker protection for all power components
  • Cabinet made of pre-painted, galvanized steel with baked enamel finish, which meets ASTM B117 salt spray resistance test
  • Condenser-fan motors are totally enclosed with internal protection
  • Direct spark ignition, Alumagard Coated Turbo-tubular heat exchangers, and induced draft combination provide for safety and
  • reliability
  • Reliable Integrated Gas Unit Controller (IGC) provides system evaluation & troubleshooting via onboard LED and two-stage gas
  • valves with redundant 100% shutoff

Maintenance Features

  • Large hinged service access doors
  • Onboard diagnostics include refrigerant pressure sensors
  • Double wall design available

Installation Features

  • Shipped with R-410A refrigerant charge
  • Single point electrical service entry, through unit bottom or side
  • Lifting Lugs
  • Factory-installed pivoting outside air hoods

Standard Limited Warranty

  • 3 years parts only on Novation™ condenser coil
  • 5 years parts only, non-pro-rated, on the heat exchanger
  • One year parts only on all other parts
Carrier Weathermaster – 48P was last modified: March 26th, 2018 by HVAC Expert

Reviews

There are no reviews yet.

Be the first to review “Carrier Weathermaster – 48P”

Factory-Installed Options

  • Low or high gas heat options include:
    • Aluminized steel heat exchanger
    • Stainless steel heat exchanger
    • Stainless steel heat exchanger with staged gas discharge air temperature control
    • Stainless steel heat exchanger with modulating gas discharge air temperature control
  • Extended chassis for an auxiliary coil
  • Double wall construction
  • 2-in. pleated filters with 4-in. field convertible filter rack
  • Bag or cartridge filters (sizes 030-070 only)
  • Outdoor air CFM station
  • Manual outside air self-closing damper
  • Modulating integrated economizer damper
  • Modulating integrated ultra-low leak economizer damper
  • Barometric relief
  • Non-modulating power exhaust (CV units only)
  • Modulating power exhaust with building pressure sensor
  • Alternate high-capacity evaporator coil (all sizes except 035)
  • High capacity power exhaust with VFD (sizes 075-100 only)
  • Return fan with VFD (sizes 075-100 only)
  • Condenser and evaporator options include:
    • All-aluminum Novation condenser and Al/Cu evaporator
    • E-coat all-aluminum Novation condenser and Al/Cu evaporator
  • Hot gas bypass
  • Controls input expansion board
  • Bypass on indoor fan motor VFD
  • GFI (ground fault interrupter) convenience outlet (powered)
  • Power terminal block
  • Non-fused disconnect
  • Airfoil supply fan (sizes 075-100 only)
  • Low outdoor sound
  • Low ambient control
  • 65 kA SCCR (460V) or 25 kA SCCR (575V)
  • Digital compressor
  • BACnet communication
  • Replaceable core filter drier
  • Security grille (sizes 070-100 only)
  • Humidi-MiZer™ adaptive dehumidification system

Field-Installed Accessories

  • Liquid propane (LP) conversion kit (sizes 030-070 only)
  • 2-in. and 4-in. filter kits
  • CO2 space sensor
  • Outdoor or return humidity sensor (enthalpy)
  • Condenser coil hail guard assembly
  • Controls input expansion board
  • Navigator™ display
  • Return air CO2 sensor
  • Smoke detector
  • Filter switch
  • Fan status switch
  • T55 temperature sensor
  • T56 temperature sensor
  • Space temperature sensor with CO2 override
  • Space temperature sensor set point and CO2 override
  • BACnet Communication module
  • MODBUS Carrier translator
  • LonWorks Carrier translator
  • System Pilot™ interface
  • Touch Pilot™ interface
  • 14-in. roof curb
  • Motormaster V control
  • Compressor sound blankets

People like you shared their purchase and installation experience!

Andrew P.Andrew P.

We just had a gas fireplace installed by Cozy Comfort Plus. What an incredible and seamless process this was - beginning to end.

We met with a few companies, and loved the professionalism and communication with Brian. He was thorough in his explanations, took his time to answer all our questions. We were so impressed that we knew right away this was a company we wanted to work with.

The installation was seamless! A team of three people (Jason, Amir, and Hamid) came on time and got straight to work. They were friendly, efficient, and left the space spotless!

Had we known that switching from a wood fireplace to a gas one was this easy, we would have done it years ago!

We would highly recommend Cozy Comfort Plus to anyone wanting to install a gas fireplace!!!

So happy we did our research and ended up working with these guys!

Read More
Richard G.Richard G.

When my furnace broke down last winter, we were without heat for two weeks while the HVAC company sourced the parts from the US. I wanted to install a gas fireplace insert to replace my existing gas log set and to act as a backup heat source (e.g. furnace breaks down again, no power). I had a number of questions about the various gas fireplace inserts (e.g. size and fit in my old fireplace) and I contacted several HVAC companies.

I found that Brian from Cozy Comfort Plus to be the most helpful and he also gave me the best price. I was home at the time and I saw that the Cozy team did a great job installing the gas fireplace insert (e.g., assembling and fitting the insert, bending and capping the chimney, etc.). If you are looking for a gas fireplace insert, I would highly recommend that you give Brian a call.

Read More
mehdi sehizadehmehdi sehizadeh

We purchased a gas insert for our home from the Cozy Comfort Plus. The whole process was super smooth and easy from the very beginning. Brian was very knowledgeable and professional. He patiently guided us through different options we had. The installation crew were also super friendly but at the same time professional and serious about their work.
I would definitely recommend them to anyone who is looking for a satisfactory experience.

Read More